Tricone bit Pambuka
TCI tricone bit minangka bit pengeboran sing paling populer ing donya, bisa digunakake kanthi akeh kanggo lenga & gas, pengeboran sumur banyu lan wilayah eksplorasi geologi.
IADC saka 417 nganti 837 bisa ketemu pengeboran formasi prabédan.
Sampeyan uga bisa ngandhani formasi pengeboran sampeyan, kita bisa menehi saran profesional tricone bit IADC.
Bit tricone pengeboran Timur dirancang lan diprodhuksi miturut standar API & ISO sing nduweni ciri umur dawa, efisiensi pengeboran dhuwur lan biaya operasi sing murah.
Ing saiki, kita bisa gawé ukuran bit kiro-kiro saka 2 7/8 "nganti 26" lan padha bisa Applied kanggo tatanan beda saka alus kanggo banget hard.
Pandhuan Tricone Bit Choice
| IADC | WOB (KN/mm) | RPM(r/min) | FORMASI sing bisa ditrapake |
| 114/116/117 | 0,3 nganti 0,75 | 180~60 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kapur, lsp. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, uyah, watu gamping alus, lsp. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Formasi alus nganti medium kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata shale alus medium, gipsum hard, watu gamping alus medium, watu pasir alus medium, tatanan alus karo interbed harder, etc. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi medium kanthi kekuatan kompres dhuwur, kayata serpih alus medium, gipsum keras, watu gamping alus medium, watu pasir alus medium, formasi alus kanthi interbed sing luwih angel, lsp. |
| 227 | 0.35~0.95 | 150~50 | Formasi medium hard kanthi kekuatan tekan dhuwur, kayata abrasive shale, limestone, sandstone, dolomit, hard gypsum, marmer, etc |
| Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan. | |||
Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Bobot | |
| inch | mm | inch | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Proses Produksi
| Jumlah Pesenan Minimal | N/A |
| Rega | |
| Rincian Kemasan | Paket Pengiriman Standar Ekspor |
| Wektu Pangiriman | 7 dina |
| Syarat-syarat pembayaran | T/T |
| Kapabilitas Pasokan | Adhedhasar Pesenan Detil |
