Aplikasi
Tricone bit digunakake kanggo geoloical prospecting, pangembangan lenga lan gas, ngebur sumur banyu, jeblugan bolongan lan nggawe bolongan kanggo seismik prospecting, construction engineering. Saiki ana sewelas jinis umum saka tricone rock bit.
Seri gigi baja: KODE IADC: 116,117,126,127,136,137,216,217,317,337,
Seri TCI: KODE IADC: 417,437,447,517,527,537,547,617,627,637,647,737,837.
TCI tricone bit, tci roller Bits, roller bit, steel tooth roller bit, TCI roller bit, TCI tricone bit
1. Ukuran saka 3 7/8" nganti 26"
2. Isine meh kabeh kode IADC.3. Kualitas sing bisa dipercaya lan rega sing cukup
Pandhuan Tricone Bit Choice
| IADC | WOB (KN/mm) | RPM(r/min) | FORMASI sing bisa ditrapake |
| 114/116/117 | 0,3 nganti 0,75 | 180~60 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kapur, lsp. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, uyah, watu gamping alus, lsp. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Formasi alus nganti medium kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata shale alus medium, gipsum hard, watu gamping alus medium, watu pasir alus medium, tatanan alus karo interbed harder, etc. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi medium kanthi kekuatan kompres dhuwur, kayata serpih alus medium, gipsum keras, watu gamping alus medium, watu pasir alus medium, formasi alus kanthi interbed sing luwih angel, lsp. |
| 227 | 0.35~0.95 | 150~50 | Formasi medium hard kanthi kekuatan tekan dhuwur, kayata abrasive shale, limestone, sandstone, dolomit, hard gypsum, marmer, etc |
| Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan. | |||
Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Bobot | |
| inch | mm | inch | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
TCI Tricone bit ing project
| Jumlah Pesenan Minimal | N/A |
| Rega | |
| Rincian Kemasan | Paket Pengiriman Standar Ekspor |
| Wektu Pangiriman | 7 dina |
| Syarat-syarat pembayaran | T/T |
| Kapabilitas Pasokan | Adhedhasar Pesenan Detil |
