Aplikasi
Tricone bit, sing sawetara uga disebut roller cone bit utawa tri-cone bit, duwe telung cones.Saben conthong bisa diputer kanthi individu nalika senar pengeboran muter awak bit.Cone duwe bantalan rol sing dipasang nalika dipasang.Bit pemotong rolling bisa digunakake kanggo ngebor formasi apa wae yen pemotong, bantalan, lan muncung sing tepat dipilih.
Karakteristik
1. Kekuwatan lan nyandhang resistance sisipan sing nambah kanthi nggunakake sisipan carbide karo kekuatan dhuwur lan resistance nyandhang dhuwur.
2. Lumahing presisi dhuwur presisi panas dianggep kanthi nggunakake proses perawatan panas majeng kanggo nambah kapasitas mbukak lan urip layanan saka prewangan.
3. Urip layanan saka bantalan luwih lengkap kanthi nggunakake bahan tahan sing luwih angel lan luwih tahan kanggo bantalan dorongan.
4. Iki seri lenga uga rock bit nggunakake disegel struktur bantalan roller.Kanthi rollers disusun ing grooves recessed ing awak conthong, ukuran jurnal prewangan tambah.
6. lumahing bantalan tikaman sing hard ngadhepi lan dianggep karo teknologi ngurangi gesekan.
7. Bit pengeboran Rotary nggunakake bantalan jurnal.Permukaan bantalan sirah sing atos.Cone prewangan inlaid karo gesekan ngurangi alloy lan banjur salaka-dilapisi.Kapasitas beban lan resistensi penyitaan bantalan saya tambah apik.
Struktur bit Tricone
Pandhuan Tricone Bit Choice
| IADC | WOB (KN/mm) | RPM(r/min) | FORMASI sing bisa ditrapake |
| 114/116/117 | 0,3 nganti 0,75 | 180~60 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kapur, lsp. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, uyah, watu gamping alus, lsp. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Formasi alus nganti medium kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata shale alus medium, gipsum hard, watu gamping alus medium, watu pasir alus medium, tatanan alus karo interbed harder, etc. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi medium kanthi kekuatan kompres dhuwur, kayata serpih alus medium, gipsum keras, watu gamping alus medium, watu pasir alus medium, formasi alus kanthi interbed sing luwih angel, lsp. |
| 227 | 0.35~0.95 | 150~50 | Formasi medium hard kanthi kekuatan tekan dhuwur, kayata abrasive shale, limestone, sandstone, dolomit, hard gypsum, marmer, etc |
| Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan. | |||
Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Bobot | |
| inch | mm | inch | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Proses Produksi
