Produsen Alat Pengeboran Profesional

25 Taun Pengalaman Manufaktur

7 7/8 Inch Iadc 127 Water Well Milled Tooth Drill Bit

7 7/8 Inch Iadc 127 Water Well Milled Tooth Drill Bit Gambar Pilihan
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Drill Bit
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Drill Bit
  • 7 7/8 Inch Iadc 127 Water Well Milled Tooth Drill Bit

Katrangan singkat:

Industri sing ditrapake: Pondasi, Pertambangan, Pengeboran Banyu
ukuran: 7 7/8 inchi, 200mm
Sambungan Utas: 4 1/2 API REG PIN
KODE IADC: 117.127.217
WOB (Bobot On Bit) 0,35 ~ 1,00 KN / mm
RPM(r/min) 180-80
Tipe: Alat bor, alat piling
Bahan: Baja Mangan Tinggi
Jinis pangolahan: Forging
Paket: kothak plywood
Formasi Kekuwatan kompresi sing sithik, kemampuan pengeboran sing dhuwur lan tatanan alus, kayata serpih, lempung, watu pasir, watu gamping alus, watu uyah, lsp

  • Harga FOB:US $ 0,5 - 9,999 / Piece
  • Jumlah Pesanan Min:100 Piece / Piece
  • Kapabilitas sumber:10000 Piece / Piece saben Sasi

    • Detail Produk

    Tag produk

    Detail Produk

    Aplikasi

    Tricone bit, sing sawetara uga disebut roller cone bit utawa tri-cone bit, duwe telung cones.Saben conthong bisa diputer kanthi individu nalika senar pengeboran muter awak bit.Cone duwe bantalan rol sing dipasang nalika dipasang.Bit pemotong rolling bisa digunakake kanggo ngebor formasi apa wae yen pemotong, bantalan, lan muncung sing tepat dipilih.

    Giling waos bit

    1, Formasi alus (114-117)

    Bit iki dirancang kanggo ngebor formasi sing paling lembut kayata serpih alus, amben abang, lan lempung, kanthi daya tahan dhuwur lan tingkat penetrasi maksimal.

    2, Formasi alus nganti medium (121,124,126,134,136,137)

    Bit iki dirancang kanggo pengeboran tatanan kayata shales, medium watu gamping alus, Sedheng sandstone lan tatanan liyane karo streaks hard intermiten.

    3, Formasi Sedheng nganti keras (213.214.215.217)

    Bit iki dirancang kanggo ngebor formasi kayata watu pasir keras, dolomit, lan formasi rusak kanthi garis-garis cherty sing keras.

    baja-tricone-bit

     

    Pandhuan Tricone Bit Choice

    IADC WOB (KN/mm) RPM(r/min) FORMASI sing bisa ditrapake
    114/116/117 0,3 nganti 0,75 180~60 Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kapur, lsp.
    124/126/127 0.3~0.85 180~60 Formasi alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, uyah, watu gamping alus, lsp.
    134/135/136/137 0.3~0.95 150~60 Formasi alus nganti medium kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata shale alus medium, gipsum hard, watu gamping alus medium, watu pasir alus medium, tatanan alus karo interbed harder, etc.
    214/215/216/217 0.35~0.95 150~60 Formasi medium kanthi kekuatan kompres dhuwur, kayata serpih alus medium, gipsum keras, watu gamping alus medium, watu pasir alus medium, formasi alus kanthi interbed sing luwih angel, lsp.
    227 0.35~0.95 150~50 Formasi medium hard kanthi kekuatan tekan dhuwur, kayata abrasive shale, limestone, sandstone, dolomit, hard gypsum, marmer, etc
    Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan.

    Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
    Bahan Unggulan 3 7/8 Tricone Bit Roller Cone Well Drilling Bit Roller Cone Cutter Bit

    Ukuran Bit

    Ukuran Bit API REG PIN Torsi Bobot
    inch mm inch KN.M Kgs
    3 3/8 85.7 2 3/8 4.1-4.7 4.0-6.0
    3 1/2 88.9 4.2-6.2
    3 7/8 98.4 4.8-6.8
    4 1/4 108 5.0-7.5
    4 1/2 114.3 5.4-8.0
    4 5/8 117.5 2 7/8 6.1-7.5 7.5-8.0
    4 3/4 120.7 7.5-8.0
    5 1/8 130.2 3 1/2 9.5-12.2 10.3-11.5
    5 1/4 133.4 10.7-12.0
    5 5/8 142.9 12.6-13.5
    5 7/8 149.2 13.2-13.5
    6 152.4 13.6-14.5
    6 1/8 155.6 14.0-15.0
    6 1/4 158.8 14.4-18.0
    6 1/2 165.1 14.5-20.0
    6 3/4 171.5 20.0-22.0
    7 1/2 190.5 4 1/2 16.3-21.7 28.0-32.0
    7 5/8 193.7 32.3-34.0
    7 7/8 200 33.2-35.0
    8 3/8 212.7 38.5-41.5
    8 1/2 215.9 39.0-42.0
    8 5/8 219.1 40.5-42.5
    8 3/4 222.3 40.8-43.0
    9 1/2 241.3 6 5/8 38-43.4 61.5-64.0
    9 5/8 244.5 61.8-65.0
    9 7/8 250.8 62.0-67.0
    10 254 68.0-75.0
    10 1/2 266.7 72.0-80.0
    10 5/8 269.9 72.0-80.0
    11 1/2 292.1 79.0-90.0
    11 5/8 295.3 79.0-90.0
    12 1/4 311.2 95.0-102.
    12 3/8 314.3 95.0-102.2
    12 1/2 317.5 96.0-103.0
    13 1/2 342.9 105.0-134.0
    13 5/8 346.1 108.0-137.0
    14 3/4 374.7 7 5/8 46.1-54.2 140.0-160.0
    15 381 145.0-165.0
    15 1/2 393.7 160.0-180.0
    16 406.4 200.0-220.0
    17 1/2 444.5 260.0-280.0
    26 660.4 725.0-780.0

    Proses Produksi

    tricone-bits-in-proyek

    Ketentuan Komersial Produk

    Jumlah Pesenan Minimal N/A
    Rega
    Rincian Kemasan Paket Pengiriman Standar Ekspor
    Wektu Pangiriman 7 dina
    Syarat-syarat pembayaran T/T
    Kapabilitas Pasokan Adhedhasar Pesenan Detil
  • Sadurunge:
  • Sabanjure:

    • PRODUK RELATED