Aplikasi
Tricone bit minangka salah sawijining alat utama kanggo bolongan jeblugan lan pengeboran sumur banyu.Rentang urip lan kinerja apa cocog kanggo pengeboran utawa ora, sing duwe pengaruh gedhe babagan kualitas, kacepetan lan biaya proyek pengeboran.
Kerusakan watu dening bit tricone sing digunakake ing tambang bisa digunakake kanthi pengaruh untu lan geser sing disebabake dening slippage untu, sing nggawa efisiensi pemecahan watu sing dhuwur lan biaya operasi sing murah.
Bit tricone sing dikembangake lan diprodhuksi dening JCDRILL utamane digunakake kanggo pertambangan terbuka skala gedhe, kayata tambang batubara terbuka, tambang wesi, tambang tembaga lan tambang molibdenum, uga tambang non-logam, pengeboran sumur banyu.Kanthi nambah macem-macem jinis, iku uga digunakake digunakake ing quarrying, ngresiki pondasi, ngebur hidrogeologi, coring, tunneling ing departemen transportasi railway lan ngebur poros ing tambang lemah.
Karakteristik
Formasi lembut TCI tricone bits:
Tatanan alus TCI tricone bit digunakake kanggo pengeboran kekuatan compressive kurang, tatanan alus banget.Bit iki maksimal nggunakake sisipan tungsten carbide conical lan chisel kanthi diameter gedhe lan proyeksi dhuwur.Desain struktur pemotongan iki, digabungake karo offset kerucut maksimum, nyebabake tingkat penetrasi bit sing dhuwur.Ing intermesh jero saka cutter larik nyegah dicokot bailing ing tatanan caket.
Formasi medium TCI tricone bits:
Bit tricone TCI formasi medium nampilake sisipan chisel tungsten carbide agresif ing larik tumit lan larik njero.Desain iki menehi tingkat pengeboran cepet lan nambah kekiatan struktur nglereni ing medium kanggo medium hard kanggo mations.O-ring karet HSN nyedhiyakake sealing sing cukup kanggo daya tahan bantalan.
Formasi keras TCI tricone bits:
The hard formasi TCI tricone bit bisa digunakake kanggo pengeboran hard lan tatanan abrasive.Nyandhang sisipan tungsten karbida tahan digunakake ing baris njaba kanggo nyegah mundhut bit gauge.Jumlah maksimum sisipan shaped hemispherical digunakake ing kabeh larik kanggo nyedhiyani kekiatan cutter lan umur dawa.
Pandhuan Tricone Bit Choice
| IADC | WOB (KN/mm) | RPM(r/min) | FORMASI sing bisa ditrapake |
| 114/116/117 | 0,3 nganti 0,75 | 180~60 | Formasi sing alus banget kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata lempung, mudstone, kapur, lsp. |
| 124/126/127 | 0.3~0.85 | 180~60 | Formasi alus kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata mudstone, gypsum, uyah, watu gamping alus, lsp. |
| 134/135/136/137 | 0.3~0.95 | 150~60 | Formasi alus nganti medium kanthi kekuatan tekan sing kurang lan kemampuan pengeboran sing dhuwur, kayata shale alus medium, gipsum hard, watu gamping alus medium, watu pasir alus medium, tatanan alus karo interbed harder, etc. |
| 214/215/216/217 | 0.35~0.95 | 150~60 | Formasi medium kanthi kekuatan kompres dhuwur, kayata serpih alus medium, gipsum keras, watu gamping alus medium, watu pasir alus medium, formasi alus kanthi interbed sing luwih angel, lsp. |
| 227 | 0.35~0.95 | 150~50 | Formasi medium hard kanthi kekuatan tekan dhuwur, kayata abrasive shale, limestone, sandstone, dolomit, hard gypsum, marmer, etc |
| Cathetan: Watesan ndhuwur WOB lan RPM ing tabel ndhuwur ora bisa digunakake bebarengan. | |||
Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Bobot | |
| inch | mm | inch | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
TCI Tricone bit workshop
| Jumlah Pesenan Minimal | N/A |
| Rega | |
| Rincian Kemasan | Paket Pengiriman Standar Ekspor |
| Wektu Pangiriman | 7 dina |
| Syarat-syarat pembayaran | T/T |
| Kapabilitas Pasokan | Adhedhasar Pesenan Detil |
