Kaluwihan
1. Ing resistance impact saka untu wis apik lan tingkat bejat waos wis suda dening ngadopsi kekuatan dhuwur lan kateguhan cemented untu karbida;
2. Desain optimized nomer baris waos, nomer waos, dhuwur waos bared lan wangun untu alloy unik menehi muter lengkap kanggo kemampuan nglereni lan kacepetan nglereni bit;
3. Roller conthong bit dikunci karo circlips bisa nanggung meksa pengeboran dhuwur;
4. Ing wesi anti-gesekan wis gandheng ing bolongan utama saka dicokot roller kanggo nambah kemampuan anti-occlusion saka prewangan;
5. Kompresi sealing optimized saka O-ring saka NBR mbenakake linuwih saka prewangan sealing;
6. Kabeh tas panyimpenan lenga karet kang bisa matesi prabédan meksa lan nyegah adi ngebur saka ngetik sistem lubrication diadopsi kanggo nyedhiyani lubrication apik kanggo sistem prewangan, lan mesthekake operasi normal saka "O" ring lan nambah urip apa. dicokot roller;
7. The grease anyar karo resistance suhu dhuwur lan nyandhang kurang diadopsi kanggo nambah resistance suhu dhuwur saka sistem lubrication sealing saka dicokot roller.
Kepiye carane milih tricone sing pas kanggo sampeyan?
Formasi alus TCI tricone bits
Tatanan alus TCI tricone bit digunakake kanggo pengeboran kekuatan compressive kurang, tatanan alus banget.Bit iki maksimal nggunakake sisipan tungsten carbide conical lan chisel kanthi diameter gedhe lan proyeksi dhuwur.Desain struktur pemotongan iki, digabungake karo offset kerucut maksimum, nyebabake tingkat penetrasi bit sing dhuwur.Ing intermesh jero saka cutter larik nyegah dicokot bailing ing tatanan caket.
Formasi medium TCI tricone bits
Bit tricone TCI formasi medium nampilake sisipan chisel tungsten carbide agresif ing larik tumit lan larik njero.Desain iki menehi tingkat pengeboran cepet lan nambah kekiatan struktur nglereni ing medium kanggo medium hard kanggo mations.O-ring karet HSN nyedhiyakake sealing sing cukup kanggo daya tahan bantalan.
Formasi keras TCI tricone bit
The hard formasi TCI tricone bit bisa digunakake kanggo pengeboran hard lan tatanan abrasive.Nyandhang sisipan tungsten karbida tahan digunakake ing baris njaba kanggo nyegah mundhut bit gauge.Jumlah maksimum sisipan shaped hemispherical digunakake ing kabeh larik kanggo nyedhiyani kekiatan cutter lan umur dawa.
Struktur bit Tricone
Pandhuan Tricone Bit Choice
| ROLLER CONE BITS (IADC) | ROLLER CONE (m/h) | KEKUATAN FORMASI | FORMASI | JENIS ROCK | KEKUATAN KOMPRES | |
| WEM | OBM | |||||
| 111/124 | 15-30 | 18-33 | Lembut banget | Formasi alus kanthi lapisan lengket lan kekuatan tekan lom | Lempung, Silt, Pasir | <25MPa |
| 116/137/437 | 9-15 | 12-18 | empuk | tatanan alus karo kekuatan compressive lom lan drillability dhuwur | Claystone, Marl, Lignite, Sandstone, Tuff | 25-50MPa |
| 136/137/517/527 | 4.5-9 | 6-12 | Sedheng alus | Formasi alus nganti medium kanthi kekuatan tekan lom interbed karo lapisan hard | Claystone, Marl, Lignite, Sandstone, Silts, Anhidrit, Tuff | 50-75MPa |
| 211/217/517/537 | 2.5-6 | 3-6 | Sedheng | Formasi medium nganti hard kanthi kekuatan tekan dhuwur lan lapisan abrasif cilik | Mudstone Limestone Anhydrite Sandstone (Kapur) | 75-100MPa |
| 211/236/537/617 | 1.5-2.5 | 1.5-3 | Sedheng Hard | Formasi hard lan kandhel kanthi kekuatan tekan sing dhuwur banget nanging ora abrasif | Batu gamping, Anhidrit, Dolomit | 100-120MPa |
| 311/347/627/637 | 1-1.5 | 1-1.5 | Hard | Formasi atos lan kandhel kanthi kekuatan tekan sing dhuwur banget lan sawetara lapisan abrasif | Shale (Kapur), Sandstone (Siliceous), Siltstone | 100-200MPa |
| 637/737/837 | 1 | 1 | Atos banget | Formasi sing keras lan abrasif | Kuarsit, Batuan beku | > 200MPa |
Pandhuan saka tricone Bits ChoiceTipe Gigi Tricone Bits
Ukuran Bit
| Ukuran Bit | API REG PIN | Torsi | Bobot | |
| inch | mm | inch | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Produk sing gegandhengan
| Jumlah Pesenan Minimal | N/A |
| Rega | |
| Rincian Kemasan | Paket Pengiriman Standar Ekspor |
| Wektu Pangiriman | 7 dina |
| Syarat-syarat pembayaran | T/T |
| Kapabilitas Pasokan | Adhedhasar Pesenan Detil |
